• email
  • facebook
  • X
  • phone
  • YouTube
  • contact

VBOX LAP TIMER & MINI LAP TIMER

NEW: NOW AVAIALABLE IN MINI AND REAR CABLE ENTRY VERSION.

Data logger and predictive lap timing display in one. VBOX LapTimers provide instant driver feedback, helping you find valuable improvements in lap times.

  • Accurate to 100th of a second
  • Compares speed at every part of the circuit
  • Static / rolling lap times and lap counter
  • Uses position, not distance, for unrivalled accuracy
  • Delta-V LED indicators
  • Data logging to SD card

KEY FEATURES

    Up to 25 Hz Data Logging

    Data logging at 10 or 25 times per second for later analysis with our intuitive software.

    Delta-V LED Indicators

    Up to six LEDs give you an indication of your speed relative to your fastest lap.

    Unrivalled Delta-T Accuracy

    Compares two different laps based on position rather than distance. Position based delta-T is far superior on long tracks.

    Free Analysis Software

    Analyse your lap times with our intuitive Circuit Tools analysis software.

    Free Lifetime Support

    Benefit from comprehensive support and software updates at no additional cost for the entire lifetime of your VBOX product.

    Made In Britain

    VBOX products are designed and manufactured in the UK. We take pride in our commitment to excellence, ensuring top-notch quality in every aspect of our products.

Product Options



    Mini Lap Timer

    For limited space

    Datasheet
    • Update rate: 10 Hz
    • Velocity accuracy: 0.18 km/h
    • Position accuracy: 2.5 m (50% CEP)
    • Connector: Side
    • IP Rating: IP65
    • Operating Temp: -20 to +70 °C
    • Power: <1.5 W
    • Input Voltage: 7 – 30 V DC
    • Dimensions: 50 x 50 x 26.7 mm
    • Weight: 103 g (excl cables)


    Lap Timer (S)

    For installation flexibility

    Datasheet
    • Update rate: 25 Hz
    • Velocity accuracy: 0.1 km/h
    • Position accuracy: 2 m (95% CEP)
    • Connector: Side
    • IP Rating: IP31
    • Operating Temp: 0 to +60 °C
    • Power: <2 W
    • Input Voltage: 7 – 30 V DC
    • Dimensions: 120 x 50 x 22 mm
    • Weight: 171 g (excl cables)


    Lap Timer (R) - Rear Cable Entry

    For more permanent installations

    • Update rate: 25 Hz
    • Velocity accuracy: 0.1 km/h
    • Position accuracy: 2 m (95% CEP)
    • Connector: Rear
    • IP Rating: IP31
    • Operating Temp: 0 to +60 °C
    • Power: <2 W
    • Input Voltage: 7 – 30 V DC
    • Dimensions: 120 x 50 x 15 mm
    • Weight: 156 g (excl cables)

    How does it work?

    Predictive lap timing has been available for some time, but traditional methods have generally relied on a distance measurement (normally from a wheel speed sensor input) for calculation.

    However, distances lap-to-lap almost always change: either by trying different lines, overtaking other cars, or perhaps by locking a wheel. Predicting a lap time accurately using this variable is nigh-on impossible, and is exacerbated on longer circuits.

    Unrivalled Accuracy With Position Based Delta-T

    We employ GNSS position from a fast updating data logger - rather than distance - to align the reference and comparison laps. This means our lap time stays accurate, even if the driver takes a different line each lap. The system will maintain 0.1s precision the entire way around any circuits, including very long circuits such as the Nurburgring or Spa. Position based delta-T is far superior to distance on long tracks.

    Watch the video below to gain a quick insight into how comparing speeds at the same points on the track compared to previous laps (Delta Velocity) can help accelerate the learning process.